Cisco Network Switch - Refurbished

Features:

Simple-to-use graphical interfaces reduce the time required to deploy, troubleshoot, and manage the network and allow you to support sophisticated capabilities without increasing IT head count.

 The switches also support Textview, a full command-line interface (CLI) option for partners that prefer it.

 Using Auto Smartports intelligence, the switch can detect a network device connected to any port and automatically configure the optimal security, quality of service (QoS), and availability on that port.

 Cisco Discovery Protocol discovers Cisco devices and allows devices to share critical configuration information, simplifying network setup and integration.

 Support for Simple Network Management Protocol (SNMP) allows you to set up and manage your switches and other Cisco devices remotely from a network management station, improving IT workflow and mass configurations.

 The Cisco FindIT utility, which works through a simple toolbar on the user’s web browser, discovers Cisco devices in the network and displays basic information, such as serial numbers and IP addresses, to aid in configuration and deployment.

Features:

• High Availability
• Redundant hardware components and power supplies
• Stateful intrachassis redundancy
• In-Service Software Upgrade (ISSU) support
• Cisco IOS XE Software Sub-package Mode
• Scalable Capacity and Throughput
• Cisco Flow Processor-based platform
• Hardware acceleration
• Control- and forwarding-plane separation
• Investment Protection
• Software modularity

 

Features:

 Scalability: Four models are available supporting 5, 6, 8 and 10 Ethernet ports, with Fast Ethernet (FE) and Gigabit Ethernet (GE), copper and fiber uplinks options

 Easy integration: Zero-touch IP discovery or Dynamic Host Configuration Protocol (DHCP)IP addressing and simple web GUI-based management

 Fast startup time: Starts 30 seconds from cold boot

 Manageability: Web GUI interface, and diagnostics and analysis options through Simple Network Management Protocol (SNMP) and syslog

 Security: secure access; port-security

 Minimize data load: VLAN aware, Internet Group Management Protocol (IGMP) and DHCP snooping to filter unwanted data

 Lightly-managed: Spanning-tree protocol (STP), Link Layer Discovery Protocol (LLDP), Cisco Discovery Protocol aware

 Gigabit uplink: Two fiber-optic SFP based. uplink for up to 50 miles (80 kilometers) links

 Industrial PoE: Up to eight PoE (IEEE 802.af) and PoE+ (802.3at) supported on selected models

 Redundant voltage feeds, alarm relays support and DIN rail mount

 Industrial environmental compliance and certifications: Ethernet/IP (CIP)

Features:

• Increased Performance to Run Concurrent Services
• Stateful Inspection Firewall and IPSec VPN Support
• 4-Port 10/100 FE Managed Switch
• Optional 802.11g/n AP
• AUX/CONS Port
• Cisco Configuration Professional (CCP) and Cisco IOS Software for Remote Management

Features:

 Support for the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods

 The latest application-specific integrated circuits (ASICs), which use low-power 28- or 40-nanometer technology and low-power, high-performance ARM CPUs

 Automatic power shutoff on ports when a link is down

 LEDs that can be turned off to save power

  Embedded intelligence to adjust signal strength based on the length of the connecting cable